Tikka Trigger Spring

Description

Upgraded Tikka trigger spring, manufactured in the USA.

• Functions in all Tikka T1X, T3, T3X and Sako 75, 85, A7 models and calibers.
• Reduces trigger pull from factory 4 lb. to a 1.5 lb. average.
• Improved accuracy and overall rifle performance by reducing trigger weight.
• Zinc plated for extreme corrosion resistance.

Instructions

• 1. Ensure rifle is unloaded and all normal safety precautions have been taken.
• 2. Remove barrel and action from stock.
• 3. Remove trigger unit from action, using correct size allen key.
• 4. Remove grub screw at the front of trigger unit which releases spring and plunger with correct size allen key.
• 5. Replace spring with new spring supplied.
• When replacing these parts into the trigger housing, take care to ensure that the trigger spring plunger faces in the same direction as when it was removed.
• 6. Refit plunger, new spring and grub screw.
• 7. Refit trigger unit to action.
• 8. Refit barrel and action to stock.
• 9. With an unloaded rifle use a trigger pull test gauge to check trigger pull is as required and safe.

*** GUNSMITH INSTALLATION RECOMMENDED, DROP TEST AFTERINSTALLATION TO ENSURE RIFLE WILL NOT FIRE